Display Accessories

Individual Acrylic Display Risers Vary heights of displayed items.  Choose from square, short or long shapes Clear acrylic risers offer a simple method for elegant and unobtrusive display of your artifacts.  Constructed of a single piece of...

Clear, non-adhesive 4 mil. Polyethylene Strap gently holds a book open while on display. Softer then polyester, the polyethylene strap can be cut into strips useful for holding damaged books together prior to binding or shelving. Easily cuts to desired...

Use this attractive acrylic container to collect donations or suggestions from your visitors.  Made of a sturdy clear acrylic with hinged back and cam lock for securing contents, box can be placed on display pedestal or countertop.  Two keys...

Provide added security for your items on display with this simple system using screws with an uncommon head design that will deter tampering. Screwdriver magnetic handle is sized for a 1/4 in. shank that will hold any of the available spanner or pin-head...

Provide added security for your items on display with this simple system using screws with an uncommon head design that will deter tampering. Screwdriver magnetic handle is sized for a 1/4 in. shank that will hold any of the available spanner or pin-head...

Risers are a great accessory to any of our cases. Used to support and elevate objects they are wrapped with a museum grade linen fabric. All risers are custom made to order. Costs are determined by the size of the riser based on the exterior surface area...

Risers are a great accessory to any of our cases. Used to support and elevate objects they are available with either a zero VOC paint finish.  Choose any color from Sherwin Williams, Benjamin Moore, or Glidden.  Submit the brand...

Raised decks are available for use in our pedestal and table cases. These elevate your objects and can have our label holder added. These decks have a removable fabric wrapped top panel and are made from all archival grade materials. Sloped sides are...

Raised decks are available for use in our pedestal and table cases. These elevate your objects and can have our label holder added. These decks have a removable fabric wrapped top panel and are made from all archival grade materials. Sloped sides are...

Illuminate the objects in your case with our light tubes. These factory-installed lights have a clean, unobtrusive appearance. They consist of an aluminum tube housing a continuous series of LEDs. The tube rotates 60° to direct the light where...

Museum Signs is one of the most discreet and versatile signage systems available for both museum and retail markets. Our low profile anodized aluminum signage plates are the perfect complement for showcasing your exhibits with sleek simplicity. Use...

Label Holder Supports made specifically to fit Label Holders.Due to fuel surcharges, additional shipping charges may apply

Fabric covered weights for gently holding pages open.  Can be used with Foam Book Support System. Price per package of 2.Due to fuel surcharges, additional shipping charges may apply

Document Display System, A simple, yet safe method for exhibiting documents This unique document system was designed specifically for the rotating display of documents inside closed exhibit cases. The components include an acrylic stand that can be...

Deluxe 3 Piece Acrylic Riser SetAccent your collections with our small display risers. Made from sturdy 3/16 in. or 1/8 in. crystal clear acrylic. These displays are a great way to showcase your models, figurines, vases, shells and pottery. Sold in a...

Mounts are available with a 3/8” horizontal or vertical acrylic lip on which to rest documents.  Acrylic mounts are also available as a custom order for non-standard sizes. Price per each. Note: Acrylic Lip must be ordered at the same...

Suction cup lifter has 2 suction cup lifter for lifting and handling glass cases. Use one lifter for a hinged case or use two lifters for a lift off type of case. Price per each lifter.Due to fuel surcharges, additional shipping charges may apply

Additional glass shelving with brackets for Heritage Floor Case.  Shelf size: - 24 x 14 x 1/2 in.  Choose either individual or per package of 2. Due to fuel surcharges, additional shipping charges may apply

 Wall cleats may be used to display mounted documents without a stand, when installed on a vertical panel or angled deck.  The cleats are made from 1/4 inch clear arcylic and feature a 45 degree beveled edge to correspond to the cleat on the...

Document Display System A simple, yet safe method for exhibiting documents This unique document system was designed specifically for the rotating display of documents inside closed exhibit cases. The components include an acrylic stand that can be...

Document Display System - A simple, yet safe method for exhibiting documents This unique document system was designed specifically for the rotating display of documents inside closed exhibit cases. The components include an acrylic stand that can be...

An easy and economical method for distributing informational brochures and pamphlets at entranceways, in individual exhibit galleries or wherever required. The holder is made of a clear, injection molded acrylic and has two drilled holes for easy...

*Display plates, platters, bowls, trays, framed printsClear acrylic easels with double bend construction provide extra stability for holding plates, bowls, platters and more.  The rounded lines and polished edges make them an unobtrusive choice for...

Thin Chest Mounts Designed to fit inside shallow display casesDisplay shirts, jackets, vests and more on this 3” deep chest mount. Constructed of conservation-quality Ethafoam™, the mount is covered with one layer of polyester...

Armature holders can be used for displaying and supporting a variety of artifacts and figurines such as Roman glass, small bronzes, blades, crosses and small masks.  Stands feature a soft 1/16" metal "T" arm that bends and can be cut...

An inert, translucent hygienic dental wax excellent for holding things where they belong - in mounts, directly to glass shelves, or for adhering loose object parts, such as a lid to a vase. Sticky Wax has passed the Oddy test. Sold in handy 2 1/4 in...

Clear acrylic stands have non-marring edges and are reinforced for stable support of swords and firearms. The 3 different heights available allow for angled display of item or tiered display of a group. Sold individuallyDue to fuel surcharges, additional...

Display related items together on varied levels. The 2-platform oval risers rest on a graceful curved support for an elegant display. The straightforward 4-step riser has a front-edge lip to keep items from falling. Ideal for sets of multiple objects...

Spider Mounts are used for displaying and holding a variety of artifacts such as oil lamps and masks, figurines such as Colima or Mayan figures, and natural history items such as shells, small skulls or gemstones.  The soft 1/16" metal...

 The perfect way to label your artifacts while they are on display.  The built-in sign space allows you to easily slide in a sign or label.Due to fuel surcharges, additional shipping charges may apply

Conservation Storage Hat/Headgear MountPreserve the shape of your hats while in storageThis mount features a crown of conservation quality Ethafoam™ covered with one layer of polyester stockinette. No adhesives or resins are used. The oval crown...

Display your framed artwork and prints with our decorative brass easel. Solid brass allows for a stable display. Pegs fold flat inward for convenient storage. Comes in 8 sizes to accommodate your specific display needs. They can be used for displaying...

Display plates, platters, bowls, trays, framed printsClear acrylic easels with double bend construction provide extra stability for holding plates, bowls, platters and more.  The rounded lines and polished edges make them an unobtrusive choice for...

Barbell risers come in a variety of sizes.  Made of clear acrylic platforms and round acrylic rods.  They assemble with stainless steel screws.  Shipped unassembled.Due to fuel surcharges, additional shipping charges may apply

Safeguard your collections during earthquakes, routine dusting, patron accidents, etc. with Quake Hold Museum Wax.Microcrystalline waxes anchor priceless art and historical artifacts to shelving. Non-acidic, non-toxic and reversible, wax is soft and...

Ultra-slim profile with removable adapter for easy transport in portfolio or briefcase.This versatile light panel provides uniform lighting across the work surface with a beautiful, even white hue for accurate examination. The Eco-friendly design keeps...

Manufactured by one of New England’s oldest textile mills, this 100% recycled polyester fabric has a straight open weave that is non-directional, making it ideal for covering exhibit decks and wall panels. The large open weave helps to hide pin and...

Delicately cradle a small ancient oil lamp or similar item on this acrylic holder. Solid acrylic base with clear rod and curved arms hold lamp at a slight angle for optimum viewing of top face. 2” x 2”. Price per each.  Due to fuel...

This stand consists of a 12" high T-Arm mount that can be bent to mount and support African Ceremonial Masks.  The top "T" bar is made of 1/8" metal and is approximately 10" across.  The upright support is...

Sturdy yet lightweight stacking stool for use in museums, libraries and schools. Constructed of American white poplar, an eco-friendly and sustainable material.  Cut out handle for easy pick up and carry-along. Bring museum-quality to any...

 An excellent solution for displaying small items such as coins, buttons, and miniature carvings.  These boxes are made of a  clear acrylic with magnifying glass built into the lid.  Simply place the item into the box and close the...

 Display small artifacts, agate slices, miniature prints and more in these versatile miniature easels.  Choose from 2 syles.  The Triangular Easels provide a sturdy support that will not tip over.  The elegantly curved Slab Easels...

Professional library book ends designed to firmly support light or heavyweight books.Made from heavyweight 18 gauge rolled steel with smooth rounded edges. Tough non-abrasive scratch resistant, baked-on polyester finish will not chip or fade. Available...

View multiple angles of figurines, sculpture, glass and other objects with these mirrored displayers. Risers are made of a bent acrylic with mirrored surface. Cubes are 5 sided mirrored acrylic squares, allowing for placing items in front as well as on...

Use these specialty displayers to show several angles of fossils, shells, and more. The angled displayer reflects the back and base of an interesting item. Available with pegs to lift item for base viewing or without for reverse viewing only. Due to fuel...

Display your painting or print without any part of the easel obstructing the view with our Low-Profile Acrylic Easel. The clear acrylic and design allow the focus to remain on the display. Due to fuel surcharges, additional shipping charges may apply.

These elegant 100% linen fabrics are perfectly suited for dressing exhibit case interiors or covering riser blocks. None of these materials have been manufactured with harmful fire-retardant chemicals or sizing which can cause tarnishing or corrosion of...

The lipped book display cradle holds books open without damaging binding or covers. The slight angle allows for easy viewing while the lipped edge prevents sliding. A double bend in the center cradles the spine so that the book can be safely opened to...

 The rounded front opening of these easels is designed to comfortably hold purses, woven pillows and other soft based items. Due to fuel surcharges, additional shipping charges may apply.

 Clear acrylic riser is designed to display shoes at a slight angle.  Made of a single piece of acrylic with 2 bends, the riser has a heel rest bar attached to the top to hold the heel and prevent the shoe from sliding. Due to fuel surcharges,...

Display your collection of antique hand guns, pipes or other artifacts with our H-arm pistol stand. Stand features a metal “H” arm extending 6” wide. The bendable arm can be molded to the desired custom fit of your artifact. The metal...

The perfect size to display your small artifacts, miniature portrait frames, or prints and agate slices.  Made of clear acrylic, the hinge allows the easel to fold shut for easy storage.  Two sizes  and two colors available. ...

Conservation Hat and Headgear Mounts Safely and elegantly display your hat collectionCrafted from conservation-quality Ethafoam™, each of these hat mounts is covered with protective material.  The oval “pillow” mount without...

Designed to safely raise a hat or helmet for easier viewing. Available in two heights and two finishes. The clear acrylic style is a two-piece design. The black stand has a steel base with an acrylic rod. Both have square bases for stability. Due to fuel...

General purpose heat gun by Porter Cable can be used for a number of tasks, from forming mounts with Fosshape to bending acrylic rods and tubing. Features include a varying Temperature Range Dial from 120 Degrees to 1150 Degrees F; a switch type slide,...

Control the humidity level within the enclosed environment of an acrylic vitrine-covered base with these specialized units. Bases are actually trays that are designed to hold silica gel and let the air within the case circulate through the silica,...

Conservation Garment Mounts—For Dresses and SuitsRealistic shapes for no-frills display of artifact garmentsSafe, yet economical, alternative to custom-made mannequinsThese solid conservation-quality Ethafoam™ mounts are covered with one...

The perfect solution to display your book upright, open and the pages protected with our Front Covered Open Book Stand. Made of clear acrylic with polished edges. Available in two sizes. Due to fuel surcharges, additional shipping charges may apply.

Safely holds and cradles delicate fossils, skeletons, bones and clusters or artifacts such as model ships or signed footballs. Backless design leaves space open for large, uneven objects. The angles piece of acrylic at the front provides a space for a...

Cushion Rare or Fragile Books Our Foam Book Support System is based on the design by noted Oxford conservator, Christopher Clarkson. The foam material supports the entire exterior surface of a book, is soft enough to conform to heavy embossing and...

Create lightweight, cost-effective mounts for costumes and more FOSSHAPE® is a unique nonwoven felt-like fabric comprised of a low melt synthetic polyester fiber that, when exposed to varying degrees of heat and pressure, can be molded to create...

Cushion and Protect Items with Uneven BasesEthafoam ring mounts provide a simple and effective means of protecting pottery, ceramics, baskets and other items with rounded, uneven or damaged bases from tipping over while in storage or on display. Ethafoam...

Exhibit your large or small closed books with this clear acrylic podium style book easel.  The angle allows for easy viewing while the lipped edge prevents sliding.  Available in three sizes to accommodate a variety of book sizes. Due to fuel...

Designed to hold and display canes, walking sticks, or any item that is long and has a narrow diameter. The support rod has two bendable metal arms that are slightly adjustable to accommodate different diameters. The black base is made of 3/8 in. thick...

Crystal clear archival polyester 4 mil strips gently hold book open while on display.  Strips are useful for holding damaged books together prior to binding or shelving. Easily cut to desired length. Wrap strips around selected pages and secure with...

The upright bookmount display books tilted 40 degrees above a flat surface. The base is made of solid brass rod and designed to provide balanced support. It is fitted with two telescoping hinged brass legs, each of which holds an independently adjustable...

The horizontal bookmount presents the book parallel to the display surface. This book support plates are mounted on four sturdy brass legs on a flat ¼" thick Plexiglas® base. Each support plate pivots on joints, allowing...

 Accentuate your collections with our glass-look risers.  Choose from a variety of sizes to display your artifacts, vases and figurines.  Constructed of a single piece of acrylic with polished edges. Due to fuel surcharges, additional...

Book Cradles:  Crystal clear cradles allow fragile book display at appropriate angles without causing undue stress to the covers & spine. Seamless 3/16 in. thick acrylic cradles are available in two spine lengths and two widths to accommodate...

Brass holders on clear acrylic bases will display items such as minerals and geodes, carved stone and other objects that are heavier in mass than size. The Tri-Peg style holds unevenly shaped items such as geodes or clusters. The three brass supports are...

Clear acrylic stands have non-marring edges and are reinforced for stable support of rifles, long guns or tools. The 3 different heights available allow you to showcase a tiered display. U-shaped opening for all stands measures 1 3/8H x 1 3/8W. Each...

Convenient for flat display of open books. Our open book stand is most useful when displaying books at table top height.  The clear acrylic stand is slightly angled inward on the sides to prevent any pressure on the binding.  A double bend in...

Our acrylic cubes with identifying numbers keep a display case with multiple items from looking too cluttered. The clear cubes have polished surfaces. Sets of consecutive numbers are photo-screen printed with black acrylic ink and numbered from 1-12. Use...

Keep your labels clean and professional looking with these label holders. The simple design consists of a clear, 1/8" thick, non-glare acrylic cover that slides into a slotted extruded aluminum back plate. Print the label on bond, text or cover stock and...

Acrylic label blocks are perfect for identifying grouped items on display. Choose from two styles, Slot Block or Label Triangle.Clear, polished acrylic blocks will hold labels inside a case or on a shelf next to each item on display. The slotted blocks...

Display your handheld or fold-able fan open and upright. Movable arms are adjustable to accommodate for varied widths. Clear acrylic allows for a clean presentation. Fan holders are available in two sizes, the small for standard size fans and large for...

*Display plates, platters, bowls, trays, framed prints Clear acrylic easels with double bend construction provide extra stability for holding plates, bowls, platters and more.  The rounded lines and polished edges make them an unobtrusive choice for...

Allow the focus to remain on the artifact being displayed with our clear acrylic cylinder holder. Designed to be used with objects that are cylindrically shaped, such as kaleidoscopes, bottles, antique rolling pins, and tools. Available in two sizes...

This lab-grade cleaning cloth is specially treated to repel dust and dirt and is recommended for use with all types of film, including polyester, photographic film and slides, and it’s also great for cleaning flatbed scanners.  The 12 3/4 x 12...

Add a finishing touch to your display with solid acrylic blocks or beveled bases.  Select from a variety of sizes and heights.  Price per each. Due to fuel surcharges, additional shipping charges may apply.

Clear acrylic adjustable plate stand is designed for your particular shaped plate, bowl or odd shaped artifact. The rotating back arm offers a variety of increments of adjustment which is useful when the angle of the plate or artifact on display is...